Skip to content
Europlasma logo
Low-pressure plasma · PECVD nanocoatings · Oudenaarde, Belgium

Nanocoatings that reach every pore, channel and edge

Vacuum plasma coatings for microfluidic chips, diagnostics, medical devices, membranes and textiles. Tunable wettability, biofunctional surfaces and PFAS-free barriers, from lab trial to production.

10 nm – 1 µm

Coating thickness range*

up to 130°

Hydrophobic PFAS-free

<10°

Hydrophilic

Water contact angle*

up to 1.8 m

Roll width, vacuum roll-to-roll*

Three core vacuum plasma solutions

Whether a surface must wet, repel or bond, the coating has to reach everywhere without changing the product.

Generated illustration of a pipette filling the blue microchannels of a transparent microfluidic chip

Wettability & Biofunctional

Permanent hydrophilic, low-friction, low-fouling and bioactive coatings for microfluidic chips, diagnostics, cell culture and medical devices, deposited in one dry step.

  • Microfluidics
  • Point-of-care diagnostics
  • Tissue engineering
  • Cell culture
  • Low fouling
  • Actifics®
Water droplet beading on a grey water-repellent technical textile

Repellency & Barrier

PlasmaGuard® is a coating family that includes PFAS-free S and X grades, providing water repellency and barriers for electronics, membranes and textiles.

  • PlasmaGuard® S
  • PlasmaGuard® X
  • Oleophobic
  • PFAS-free
  • Conformal coating
  • Splash-proof
Generated illustration of a green printed circuit board assembly with microchips, capacitors and connectors

Cleaning, Etching & Activation

Molecular-level cleaning, etching up to 1 µm and activation before bonding, printing or coating, on parts too complex for liquids.

  • Fine cleaning
  • Etching
  • Bond preparation
  • Catheters
  • Implants
  • PCBs

Do it with us, or do it yourself

Process & toll coating

We develop your process and coat your parts or rolls in Oudenaarde, from feasibility trial to series production.

Equipment

Turnkey batch (50–1,836 L) and roll-to-roll vacuum plasma systems, designed and built around your process.

Equipment

Process chemistry

Qualified precursors, including the PlasmaGuard® range, supplied and supported for installed systems.
Europlasma batch vacuum plasma system with its chamber door open, showing the loading racks
Batch vacuum plasma
Open Europlasma roll-to-roll vacuum plasma system loaded with an orange textile web
Vacuum roll-to-roll
Operator at the touchscreen of an open Europlasma industrial vacuum plasma system
Engineering at production scale

How vacuum plasma works

  1. 01

    Load

    Parts go in on racks, or rolls are wound through the chamber.

    Technical spec
    Batch 50–1,836 L or roll-to-roll
    Outcome
    Every surface exposed
  2. 02

    Pump down

    The chamber is brought to low pressure, removing air and moisture before treatment.

    Technical spec
    Low pressure, low temperature
    Outcome
    Clean, controlled atmosphere
  3. 03

    Precursor feed

    A process gas or vaporised monomer is dosed into the chamber. No solvent, no water.

    Technical spec
    Fully dry process
    Outcome
    Chemistry matched to the target function
  4. 04

    Plasma deposition

    The plasma activates the precursor, which polymerises on every exposed surface, including inside pores and between fibres.

    Technical spec
    PECVD / plasma polymerisation
    Outcome
    Conformal, through-thickness coating
  5. 05

    Functional surface

    The coating is covalently bonded and invisible. Breathability, hand and pore size stay unchanged.

    Technical spec
    Typically 10–200 nm
    Outcome
    Permanent function, no wash-off
Stainless steel interior and electrode racks of an open Europlasma vacuum plasma chamber
Inside the vacuum chamber
Compact Europlasma roll-to-roll vacuum chamber standing open beside its control cabinets
Roll-to-roll vacuum chamber

Proven at industrial scale

Three decades of low-pressure plasma, from the first roll-to-roll system to today's PFAS-free barriers.

1996 · Filtration pioneer

Europlasma brought plasma nanocoating to the filtration market and has equipped more than 30 filtration producers worldwide.*

Industry firsts

The first roll-to-roll plasma machine and the first industrial nanocoating machine, backed by more than 120 patents and patent applications filed since 2000.

Life sciences

Proven bioactivity improvement with our Actifics® coatings.*
PlasmaGuard logo

Product spotlight

PlasmaGuard® — 100% PFAS-free protection, nanometres thin

Ultra-thin, PFAS-free coatings that keep water, sweat and corrosion out of electronics, medical devices and membranes, applied by vacuum plasma.

PlasmaGuard® S — Splash-proof

  • PFAS-free, 10–200 nm*
  • Water contact angle > 105°*
  • ISO 10993-5 and ISO 10993-10*

PlasmaGuard® X — High-performance barrier

  • Multilayer, below 1.5 µm*
  • Exceeds IPX7 and IPX8 requirements*
  • WVTR < 10⁻² g/m²/day, pinhole-free*

Ready to solve your challenge?

We help engineering teams solve real surface challenges. Tell us about your application.

I'm looking for

Part of

Plasmalex Group

Europlasma NV, Oudenaarde, Belgium — part of the Plasmalex Group. One of four specialized companies within the group, delivering industrial solutions in plasma surface treatment technology.